|   |   |   |   |   |   |   |   |   |   | 
MS NOISE acoustic racks - cabinets for servers & network equipment
   
   
    •   
 
   
 
 






   
 
 
 
•   Premium acoustic cabinets for servers & routers
MS Noise™ Soundproofed rackmount cabinets with thermostatic cooling - MSTC Series (12U, 24U, 42U).


This premium range of quiet rack enclosures provides the ultimate combination of noise reduction and air cooled thermal performance. The MSTC range is a viable alternative to a costly dedicated comms room, by allowing the deployment of servers and network equipment directly in the office environment.

This range of quiet rack cabinets will reduce equipment noise to a level below that of background noise in an average office without talking, whilst providing a thermal load capacity of up to 7.2 kW (equivalent to 37 single processor servers and peripherals).

Being thermostatically controlled, the rear fan blowers maintain sufficient airflow throughout the rack cabinet, providing the required level of thermal dissipation, whilst optimising the level of 'ambient' background noise the cabinet itself generates and minimising power expenditure.

Also, the spacious internal dimensions provide ample room for orderly cable routing throughout the 9210 cabinet, with varied cable entry options to the bottom of the enclosure. The inclusion of a washable dust-filter, promoting extended equipment life-span and reduced maintenance costs, is optional throughout the MSTC range.

Slideshow image


 


MSTC Sound-Proof Enclosures

» Capable of up to 28.5DBa noise attenuation

» Independently tested by ‘MIRA’ Test Laboratories (Sound Power Measurement in accordance with ISO3744)

» 7.2kW heat dissipation on active MSTC cabinets

» The MSTC Cabinet is compatible with all leading server brands including blade servers

» Passive and active models available

» Patent pending design
 


Product Code
MSTC-1292-AA
MSTC-2492-AA
MSTC-4292-AA
Useable Height (1U = 44.45mm)
12U
24U
42U
External Cabinet Dimensions in mm (Height/Width/Depth)
(includes height of castors)
716 x 780 x 1210mm
1250 x 780 x 1210mm
2050 x 780 x 1210mm
Max. Distance between front & rear mounting profiles
750mm
Max. Rackmount Unit Depth
860mm
(measured from front blanking plate surface to inside of rear door)
Assisted Cooling Mechanism
2 x fan blowers located in rear doors
Assembled Weight without Rackmount Equipment
118Kg
179 Kg
298 Kg
Max. Ditributed Load (total equipment weight)

500 Kg

Castors
Supplied as Standard
Cable Access Dimensions
Min. One Floor cable access point: 100 x 310mm (additional floor cable access points can be fitted upon request)
Cabinet Colour
Black with Montana Blue trim
Cabinet Features
Heavy Duty Steel Construction
Removable side panels & doors for easy access
Key lockable doors and side panels
Dust Ingress Protection
A Removable and washable filter is available as an optional accessory
Delivery
Delivered fully-assembled and ready to go

The MSTC family of enclosures has been designed to be more than just a state of the art sound proof cabinet; it’s also a state of the art all round communications unit.

The combination of record breaking noise attenuation and thermal dissipation performance ensures the MSTC family is a world class leader in its field.

For the uninitiated 28.5DBa is a massive noise reduction to achieve from a 19” Enclosure and to achieve this we have invested heavily in research and development, utilising state of the art technology and included the latest most effective acoustic materials available.

This amazing noise reduction has been achieved without compromise to cooling the active equipment housed within. In fact the MSTC family not only out performs all other 19” enclosures in noise reduction but also in thermal capacity by achieving a staggering 7.2kw of heat dissipation.



So what does 28.5 dB(A) noise reduction mean and what benefits do I get?

As with all sound proof enclosures, the performance of the MSTC family relies upon the ingenuity of the enclosure design and the acoustic material used in order to remove as much noise from the enclosed sound source (e.g. servers) as is possible.

Noise is measured in decibels (dB(A)) so when we claim 28.5DBa noise attenuation, we are basically saying this is the amount of noise we are removing from the sound source. So if the starting point of the sound source is 69dB(A) (equivalent to a vacuum cleaner at 3m) then by removing 28.5DBa will be the equivalent of reducing the sound source down to say ‘quiet speech’ putting this into context, the cabinet placed in an office environment which can sit anywhere between 48dB(A) (average office without speech) and 78dB(A) (busy office with speech), then basically this is a long winded way of saying you will not be able to hear the original sound source from within the MSTC Cab – unless you had your ear pressed up again the cabinet!

Available in three heights, 12U, 24U and 42U, 780mm wide and 1100mm deep the MSTC cab comes in two variants Active and Passive. The Active is designed to deal with higher heat loads and comes complete with variable fan speed controlled and temperature sensor, ensuring maximum energy efficiency.

Setting aside its acoustic and thermal capabilities the MSTC cab is a complete all round communications cabinet, addressing both active and passive equipment in equal measure. Accommodating all main server brands e.g. IBM, HP, Dell, Sun, Viglan, etc., plus as importantly dealing with the infrastructure cabling and patch cabling.

MSTC Range Accessories


Description:
12U / 24U / 42U
Dust Filter

Product Codes:
MSTC-DF12 / MSTC-DF24 /
MSTC-DF42

 

 Dust Filter Kit

Description:
12U / 24U / 42U
Finger Cable Trunking

Product Codes:
MSTC-FCT12 / MSTC-FCT24 /
MSTC-FCT42

 

 Finger Cable Trunking
   

Description:
1U / 2U / 3U / 4U / 5U
Blanking Panel

Product Codes:
MSTC-BP-1U / MSTC-BP-2U /
MSTC-BP-3U / MSTC-BP-4U /
MSTC-BP-5U

 

 Blanking Plates

Description:
266mm / 532mm
Tower Infill

Product Codes:
MSTC-TBP-266
MSTC-TBP-532

 

 Tower  Infill
   

Description:
Plinth System

Product Code:
MSTC-PS

 

 Plinth

Description:
9210 Earthing Kit - 6 Leads

Product Code:
MSTC-EBK

 

 Earthing Kit
   

Description:
Cable Entry Foam Block

Product Code:
MSTC-CEFB

 

 Cable Entry Box

Description:
Load Spreader 780 x 1100mm

Product Code:
MSTC-LSP

 

Awaiting Image
   

Description:
Foam Anti-Recirculation Kit

Product Code:
MSTC-ARK

 

 Foam Anti_Recirculation Kit

Description:
120mm Levelling Feet
(Set of Four)

Product Code:
MSTC-LF

 

 Levelling Feet
   

Description:
12U / 24U / 42U Infill Side Venting Kit

Product Codes:
MSTC-SVKI12 / MSTC-SVKI24 /
MSTC-SVKI42

 

 Infill Side Venting Kit

Description:
Fan Module for
Infill
Side Venting Kit

Product Code:
MSTC-SVKFM

 

Awaiting Image
   

Description:
9210 Baying Kit

Product Code:
MSTC-BK

 

  Baying Kit

Description:
Heat Ducting Kit (Active Only)

Product Code:
MSTC-HDK-RF (Retro Fit)
MSTC-HDK-FF (Factory Fit)

 

 Heat Ducting Kit

Shelving

Description:
1U Adjustable Shelf (550-950mm)

Product Code:
MSTC-AS1U-B

 

1U Adjustable Shelf

Description:
Telescopic Shelf - 465x570mm

Product Code:
MSTC-TS465-570

 

Telescopic Shelf
   

Description:
2U Cantilever Modem Shelf 400mm
2U Cantilever Modem Shelf 300mm
1U Cantilever Modem Shelf 300mm

Product Code:
MSTC2U-CS-400 / MSTC2U-CS-300 / MSTC1U-CS-300

 

Cantilever Modem Shelf
 

Static Support Rails

Description:
Front Fixing - depth 740mm

Product Code:
MSTC-FFSSR-B

 

Static Support Rails - Front Fixing

Description:
Side Fixing - depth 715mm

Product Code:
MSTC-SFSSR-B

 

Static Support Rails - Side Fixing

Cable Management

Description:
1U / 2U Horizontal 4 Ring Cable Tidy

Product Code:
MSTC-CR1U-4 / MSTC-CR2U-4

 

1U Horizontal 4 Ring Cable Tidy

Description:
24U / 36U / 42U x 75mm Cable Tidy

Product Code:
MSTC-CT24-75 / MSTC-CT36-75 / MSTC-CT42-75

Cable Tidy




 





Pin MS NOISE